Lighthouse_project_Pt.3

Because I wasn’t getting screen grabs at regular intervals this is the first screen grab I have. This is after I made the island that the tower is on. I made the island by creating a sphere, deleting the bottom half of its faces and moving and rotating random faces with soft selection

I created the base of the tower by extruding a cylinder up and scaled it in, I made the point on the central tower by making a pyramid shape through extrusion and scaling in view mode 3. I made the upper 3 spires by creating a new cylinder, deleting its bottom and top faces, rotating and placing it partially inside the top of the base tower as shown in the picture, the I moved the top edge out and made it level with the grid the extruded and scaled until I got to the top where I contracted the edges so that the hole was very small then I just filled the hole and changed some of the faces (left most tower) so that they looked like glass. Then for the other 2 towers I duplicated the first tower and modified 1 of the duplicate towers it into the tower with the crystal like thing in it (right most tower.). I made the crystal by creating a sphere and changing the number of sub divisions, I set subdivisions axis to 6 and the subdivisions height to 8, the I rotated it 90 degrees in the x axis then I duplicated it and rotated the duplicate 90 degrees in the y axis and used combine to make them the same object.